Worked scenario
Base example
Engraving width is 120 mm. All other inputs remain at the base values.
| Input | Value | Unit |
|---|---|---|
| Engraving width | 120 | mm |
| Engraving height | 80 | mm |
| Line spacing | 0.1 | mm |
| Scan speed | 300 | mm/s |
| Travel overhead | 20 | % |
| Pass count | 1 | passes |
Calculated results
| Result | Value | Unit |
|---|---|---|
| Scan lines per pass | 800 | lines |
| Ideal scan distance | 96 | m |
| Estimated scan duration | 6.4 | minutes |
Worked scenario
Smaller first input
Engraving width is 96 mm. All other inputs remain at the base values.
| Input | Value | Unit |
|---|---|---|
| Engraving width | 96 | mm |
| Engraving height | 80 | mm |
| Line spacing | 0.1 | mm |
| Scan speed | 300 | mm/s |
| Travel overhead | 20 | % |
| Pass count | 1 | passes |
Calculated results
| Result | Value | Unit |
|---|---|---|
| Scan lines per pass | 800 | lines |
| Ideal scan distance | 76.8 | m |
| Estimated scan duration | 5.12 | minutes |
Worked scenario
Larger first input
Engraving width is 144 mm. All other inputs remain at the base values.
| Input | Value | Unit |
|---|---|---|
| Engraving width | 144 | mm |
| Engraving height | 80 | mm |
| Line spacing | 0.1 | mm |
| Scan speed | 300 | mm/s |
| Travel overhead | 20 | % |
| Pass count | 1 | passes |
Calculated results
| Result | Value | Unit |
|---|---|---|
| Scan lines per pass | 800 | lines |
| Ideal scan distance | 115.2 | m |
| Estimated scan duration | 7.68 | minutes |
Time a small representative engraving, then tune the overhead percentage against the machine’s actual behavior.